QLEE Dimmable Auto Motion Sensor Led Night Light 1.4w USB Chargeable PIR Body Inductive Lights Battery Power Wall Lights Bedroom Hallway Closet Stairs
Dimmable Motion Sensor PIR Body Induction light
Introduction
1.Sensor distance 3-6 meter ,angle of sensor bigger then 120°,the light will off when people leaving after 20 second.
2.Gradient lights up and lights off.
3.Constant current power supply,above 90% effectiveness ton sure light enough.
4.Dimmable: change brightness after by press the button for more than 2 seconds under the sensormode and continuous mode.
5. 3 Molde light : sensor mode， constant light mode,Flash mode(Frequency 1Hz) .
press button to sensor mode--press to constant light mode-- press to flashmode--press to cut off
6. 2 kinds power source acceptable: 1x14500 lithium battery(included) or 3x AAA battery (not included).
7. Indication Lights: charging,Indication Lights is flashing; full charged, Indication Lights is constant light.
Specifiction
Size:D10 x 4cm (4"x4"x1.6" )
Material of products:ABS+PC
light source: LED
Charging voltage:DC5V
Power:0.2W--1.4W,Default power is 0.5W.
Battery:3*AAA battery (not included) or 1*3.7V 14500 lithium battery (included).
N.W:100g
Brand: QLEE
Installation Notes
1.Paste the round iron in the place where need to fix,draw the light on the iron with magnet inside.
2.It can Hanging the light on the Nails if there is no space can pastethe round iron.
3.Or you can put the light in the table or flat place directly.
Package Include:
1 x Dimmable Motions Sensor Light
1 x 14500 battery
1 x Pastable Iron Plate Base
1 x USB Cable
Character:
Size:D10 x 4cm, power 1.4W MAX, Dimmable by press the button for more than 2 seconds. Sensor distance 3-6 meter ,angle of sensor bigger then 120°,the light will off when people leaving after 20 second.
3 Molde light : sensor mode， constant light mode,Flash mode(Frequency 1Hz) .
press button to sensor mode--press to constant light mode-- press to flashmode--press to cut off.
2 kinds power source acceptable: 1x14500 lithium battery(included) or 3x AAA battery (not included).
Perfect for home,cabinet,entryways, walkways, sheds, patios, balconies, decks, steps, garages, carports, and backyard and farm sheds.
3 kinds fix molde: magnet(Paste the round iron in the place where need to fix,draw the light on the iron with magnet inside.), hanging, stand
Dimmable Motion Sensor PIR Body Induction light
Introduction
1.Sensor distance 3-6 meter ,angle of sensor bigger then 120°,the light will off when people leaving after 20 second.
2.Gradient lights up and lights off.
3.Constant current power supply,above 90% effectiveness ton sure light enough.
4.Dimmable: change brightness after by press the button for more than 2 seconds under the sensormode and continuous mode.
5. 3 Molde light : sensor mode， constant light mode,Flash mode(Frequency 1Hz) .
press button to sensor mode--press to constant light mode-- press to flashmode--press to cut off
6. 2 kinds power source acceptable: 1x14500 lithium battery(included) or 3x AAA battery (not included).
7. Indication Lights: charging,Indication Lights is flashing; full charged, Indication Lights is constant light.
Specifiction
Size:D10 x 4cm (4"x4"x1.6" )
Material of products:ABS+PC
light source: LED
Charging voltage:DC5V
Power:0.2W--1.4W,Default power is 0.5W.
Battery:3*AAA battery (not included) or 1*3.7V 14500 lithium battery (included).
N.W:100g
Brand: QLEE
Installation Notes
1.Paste the round iron in the place where need to fix,draw the light on the iron with magnet inside.
2.It can Hanging the light on the Nails if there is no space can pastethe round iron.
3.Or you can put the light in the table or flat place directly.
Package Include:
1 x Dimmable Motions Sensor Light
1 x 14500 battery
1 x Pastable Iron Plate Base
1 x USB Cable
Character:
Size:D10 x 4cm, power 1.4W MAX, Dimmable by press the button for more than 2 seconds. Sensor distance 3-6 meter ,angle of sensor bigger then 120°,the light will off when people leaving after 20 second.
3 Molde light : sensor mode， constant light mode,Flash mode(Frequency 1Hz) .
press button to sensor mode--press to constant light mode-- press to flashmode--press to cut off.
2 kinds power source acceptable: 1x14500 lithium battery(included) or 3x AAA battery (not included).
Perfect for home,cabinet,entryways, walkways, sheds, patios, balconies, decks, steps, garages, carports, and backyard and farm sheds.
3 kinds fix molde: magnet(Paste the round iron in the place where need to fix,draw the light on the iron with magnet inside.), hanging, stand